THE METHOD OF IMPLEMENTATION OF THE AUTOMATED SYSTEM DESIGNING AND MANUFACTURING FIXTURES IN THE TECHNOLOGICAL PREPARATION OF AIRCRAFT PRODUCTION IN VIRTUAL REALITY MODE

Сергей Андреевич Бычков, Виталий Георгиевич Читак

Abstract


The technique of application and practical implementation of the technology of virtual reality in the technological preparation of the production of domestic civil aircraft has been developed. The technique is used to implement the assembly of parts, assemblies and accessories in the aggregate and assembly production on the example of the center section of the An-148 aircraft and the creation of technological planning of workplaces based on designed electronic models. The main provisions of the concepts of system design and manufacture of devices in the mode of virtual reality. The principles of its implementation on the basis of electronic design and technological layouts are proposed. The composition of the main components of the systems and the sequence of stages of stimulation of production technologies for ЗD, digital design and technological preparation of production are given.


Keywords


methods; computer-aided design; virtual reality; aggregate assembly; electronic models.

References


Читак В.Г. Состояние и перспективы развития авиастроения Украины в современных условиях / В.Г. Читак // Вопросы проектирования и производства конструкций летательных аппаратов: сб. науч. тр. Нац. аэрокосм. ун-та им. Н.Е. Жуковского «ХАИ». – Вып. 2 (94).– Х., 2018. – С. 7 – 18.

Читак В.Г. Анализ современного состояния информационной поддержки автоматизированных технологических процессов производства отечественных гражданских самолетов / В.Г. Читак // Вопросы проектирования и производства конструкций летательных аппаратов: сб. науч. тр. Нац. аэрокосм. ун-та им. Н.Е. Жуковского «ХАИ». – Вып. 3 (95).– Х., 2018. – С. 7 – 19.

Handbook of Life Cycle Engineering: Concepts, Tools and Techniques / Edited by A. Molina, J.M. Sanches, A. Kusiak. – London: Chapman&Hall, 1998.

CALS (Continuous Acquisition and Life Cycle Support – непрерывная информационная поддержка жизненного цикла изделия) в авиастроении / А.Т. Братухин, Ю.В. Давыдов, Ю.С. Елисеев, Ю.Б. Павлов, В.И. Суров. – М.: Изд-во МАИ, 2000. – 304 с.

Информационные технологии в наукоемком машиностроении: компьютерное обеспечение индустриального бизнеса / под общ. ред. А.Т. Братухина . - К.: Техніка, 2001. – 728 с.

Гребеников А.Г. Методология интегрального проектирования и моделирования сборных самолетных конструкций / А.Г. Гребенников. – Х.: Нац. аэрокосмич. ун-т им. Н.Е. Жуковского «Харьковский авиационный институт», 2006. – 332 с.

Воронько В.В. Научные основы автоматизированной сборки авиационных конструкций. – дис…докт. техн. наук 05.07.022. – проектирование, производство и испытания летательных аппаратов. – Харьков, нац. аэрокосм. ун-т им. Н.Е. Жуковского «ХАИ», 2014. – 306 с.




DOI: https://doi.org/10.32620/oikit.2018.82.04

Refbacks

  • There are currently no refbacks.