INFLUENCE OF RIVET TYPE ON FATIGUE OF RIVETED PLATE SPECIMENS WITH FILLED UNLOADED HOLES

Вадим Александрович Гребеников, Анатолий Константинович Мялица, Андрей Михайлович Гуменный, Владимир Михайлович Андрющенко, Антон Сергеевич Чумак, Лилия Юрьевна Буйвал, Сергей Семенович Капустин

Abstract


The effect of the rivet type on the fatigue of plate samples with filled unloaded holes is investigated. The design of the samples was developed with their subsequent manufacture at the Kharkov Aviation State Production Enterprise. Experimental studies of the fatigue of specimens of compounds with the U30MES-5M sealant with blind rivets OST 1 34100-80 and rivets with flat-rounded heads OST 1 34078-85 were carried out. The results of these studies are presented.


Keywords


sample plate with filled unloaded hole, blind rivet, rivet with flatrounded head, cyclic loading, fatigue life

References


ТПИ-1033. Клепка металлических конструкций. – Изд. 4-е. – Х.: ХГАПП. – 68 с.

ОСТ 1 00872-77. Соединения заклепочные. Методы испытаний. – Введ. 01.07.1978. – 25 с.

ОСТ 1 34096-80 ÷ ОСТ 1 34101-80. Заклепки с потайной головкой ∠120°. Конструкция и размеры. – Взамен 3547А ÷ 3552А; введ. 01.07.1986. – 6 с.

ОСТ 1 34073-85 ÷ ОСТ 1 34083-85. Заклепки с плоско-скругленной головкой. Конструкция и размеры. – Введ. 01.07.1986. – 14 с.

ТУ 38-1051436-88. Герметик тиоколовый У-30МЭС-5М. – Введ. 01.10.1988. – 28 с.


Refbacks

  • There are currently no refbacks.