ENGINEERING TECHNIQUE FOR THE IMPLEMENTATION OF QUALIMETRY IN THE SYSTEM OF METROLOGICAL SUPPORT FOR THE STAGES OF DESIGNING AIRCRAFT STRUCTURES FROM POLYMER COMPOSITE MATERIALS

А. В. Гайдачук, М. Н. Журибеда

Abstract


In connection with the permanent growth worldwide, including in the domestic aircraft industry, of the use of polymer composite materials in the structures of civil aircraft, the problem of analyzing the effectiveness of the use of composites at all stages of the life cycle of the corresponding structures becomes relevant. An engineering method for the implementation of qualimetry in the system of metrological support for the main stages of designing structures made of polymer composite materials in civil aircraft of the transport category, based on the use of integrated quality indicators and expert assessment of the characteristics of the main design stages, is proposed and justified. General key tables for the synthesis of significance levels of the main stages of designing composite structures for expert evaluation of the effectiveness of operations have been developed. The main (defining) principles of integral indicators of quality of the components of design levels are established. The reliance of experts on the main features of the quality indicators of the design stages ensures the minimization of errors in establishing the significance ranks of these stages. The decomposition of the classifier of the type "Design of aircraft structures from polymer composite materials" was carried out, which systematizes the analysis and synthesis of the main steps for implementing the proposed engineering methodology for qualimetric support for the design of aircraft structures from polymer composite materials, the sequence and implementation by an expert group.A criterion for the effectiveness of an engineering methodology for qualimetric support for the implementation of design stages has been implemented in the form of an additive model of the ratio of the effect of each design stage, expressed as the sum of quality indicators to the total cost of funds for its provision, taking into account the coefficient of significance of the indicators. A hypothetical example of the implementation of the proposed engineering methodology for analyzing the effectiveness at the initial stages of its development at an enterprise that predicts a promising increase in the volume of use of composites in domestic aircraft of the transport category and their modifications is given. The proposed engineering method for the implementation of qualimetry in the system of metrological support for the stages of designing composite structures of domestic aircraft, after practical testing and refinement in a specific production environment, can become an effective tool for increasing the effectiveness of predicting the growth in the volume of use of polymer composite materials in the domestic aircraft industry.


Keywords


civil aircraft, polymer composite materials, metrological support of aircraft structures, efficiency criterion, qualimetric indicators, engineering design methods, expert assessments, general identification tables.

References


Классификационный аспект метрологического обеспечения авиационных конструкций из полимерных композиционных материалов / Wang Bo и др. // Открытые информационные и компьютерные интегрированные технологии : сб. науч. тр. Нац. аэрокосм. ун-та им. Н. Е. Жуковского «Харьков. авиац. ин-т». – Харьков, 2020. – Вып. 90. – С. 65–77. doi: 10.32620/oikit.2020.90.05

Бычков, С. А. Приближенный метод экспертных оценок эффективности применения полимерных композиционных материалов в конструкциях гражданских самолетов на основных этапах жизненного цикла / С. А. Бычков, М. Н. Журибеда // Открытые информационные и компьютерные интегрированные технологии : сб. науч. тр. Нац. аэрокосм. ун-та им. Н. Е. Жуковского «Харьков. авиац. ин-т». – Харьков, 2021. – Вып. 94. – С. 4–16. doi: 10.32620/oikit.2021.94.01

Меерович, Г. Ш. Анализ эффективности: принципы, критерии, опыт / Г. Ш. Меерович. – М.: Знание, 1979. – 64 с.

Балабуев, П. В. Опыт применения композиционных материалов в транспортной авиации / П. В. Балабуев // Авиационная промышленность. – 1986. – № 9. – С. 9–14.

Бычков, С. А. Решение проблемы создания авиаконструкций из полимерных композиционных материалов на АНТК «Антонов» / С. А. Бычков, В. Г. Бондарь, В. Н. Король // Авиационно-космическая техника и технология. – 2003. – № 5 (40). – С. 34–37.

Бычков, С. А., Состояние и проблемы применения новых конструкционных материалов в отечественных гражданских самолетах в современных условиях. Сообщение 2. Полимерные композиты в отечественных самолетах в современных условиях (1995 – 2015 гг.): Первопричины и закономерности внедрения / С. А. Бычков, А. А. Коцюба // Авиационно-космическая техника и технология. – 2016. – № 6 (133). – С. 4–14.

Бешелев, С. Д. Математико-статистические методы экспертных оценок / С. Д. Бешелев, Ф. Г. Гурвич. – М.: Статистика, 1980. – 263 с.

Эддоус, М. Методы принятия решений / М. Эддоус, Р. Стэнсфилд ; пер. с англ. И. И. Елисеевой. – М.: Аудит, 1997. – 590 с.

Baker, A. Composite Materials for Airframe Structures / A. Baker, S. Dutton, D. Kelly. – Virginia: American Institute for Aeronautics and Astronautics Ins., Reston, – 2004. – 599 р.

Композиционные материалы. Справочник / под ред. Д. М. Карпиноса. – Киев: Наукова думка, 1985. – 592 с.

Композиционные материалы. Справочник / под общ. ред. В. В. Васильева и Ю. М. Тарнопольского. – М.: Машиностроение, 1990. – 512 с.

Томашевич, Д. Л. Конструкции и экономика самолета / Д. Л. Томашевич. – М. : Оборонгиз, 1960. – 202 с.

Качество и сертификация промышленной продукции : учеб. пособие / А. Г. Гребеников [и др.]. – Харьков : ХАИ, 1988. – 396 с.

Михайлин, Ю. А. Конструкционные полимерные композиционные материалы / Ю. А. Михайлин. – СПб.: Научные основы и технологии, 2008. – 822 с.




DOI: https://doi.org/10.32620/oikit.2022.96.05

Refbacks

  • There are currently no refbacks.