Aerospace Technic and Technology

In the article outcomes of probes by definition of influencing the flexibility of pen on optimum requirements of linking of shelves pairwise shrouded blades of turbines are considered. A design feature of such blades is that a composite shank, each half of which has a pen with a bezigless shroud platform, is freely inserted into the groove of disk. The application examples pairwise shrouded blades in turbines of a gas turbine engine (GTD), and also outcomes of the analysis of initial conditions of linking on shroud platforms of such blades are set up. It is shown that under the conditions of operation of the engine, there can be both an interference fit and a clearance on the shroud platform. A description is given of the developed methods for the experimental determination of the initial conditions for pairing the retaining shelves of pairwise shrouded blades and the study of their damping ability and vibration stress. Outcomes of the analysis of requirements of linking of bandage shelves of blading of impellors, experimental researches by definition of their influencing on vibrational stresses and a damping current capacity pairwise shrouded blades and their beam models as systems with a rigorous regular which one is characterized by the elastic-dissipative connection caused both bandages, and tool joints, taking into account flexibility of pen are introduced. It is displayed, that there is the best value of the argument of linking of bandage shelves at which one the maximum damping current capacity of twin blades and according to their minimum of vibrational stresses is reached. Thus, its meaning depends on the flexibility of the pen of a blade. By results of the conducted experimental researches of packages of pairwise shrouded blades of three turbine stages GTD AI-25 and turbine GTD D-36 first stage the relation of the best value of argument Δн, wholesale of linking of bandage shelves from the flexibility of pen which one allows to forecast its value for blades of other stages GTD is constructed. As blades of first stages of turbines GTD AI-322 and D-36 are characterized by flexibility neighbors it is possible to forecast with a high probability, that best values of the argument of linking of their shroud platforms will be one level.

pairwise shrouded blades; flexibility; linking of shelves; a damping current capacity; vibrational stresses

Popov, K. M., Mukhtarov, M. Kh., Kiselev, L. I., Safronov, I. V. Vliyanie radial'nogo zazora i bandazhirovaniya rabochikh lopatok turbiny na poteri KPD v vysokonagruzhennykh okhlazhdaemykh turbinakh [Effect of radial clearance and banding of turbine blades on efficiency losses in highly loaded cooled turbines]. Trudy CIAM, 1980, no. 911, pp. 41-57. (In Russian).

Birger, I. A., Shorr, B. F. Dinamika aviatsionnykh gazoturbinnykh dvigateley [Dynamics of aviation turbo-engines]. Moscow, Mashinostroyeniye Publ., 1981. 232 p. (In Russian).

Merkulov, V. M., Il'yushchenko, F. D. O vybore sposoba bandazhirovaniya rabochikh lopatok turbin GTD [Choice of turbine blades shrouding method]. Vestnik dvigatelestroeniya – Herald of aeroenginebuilding, 2005, no. 2, pp. 114-117. (In Russian).

Matveev, V. V. Dempfirovanie kolebanii de-formiruemykh tel [Damping vibrations of deformable bodies]. Kiev, Naukova Dumka Publ., 1985. 264 p. (in Russian).

Troshchenko, V. Т. Nesushchaya sposobnost' rabochikh lopatok GTD pri vibratsionnykh nagruzheniyakh [Bearing capacity of GTE working blades under vibration loads]. Kiev, Naukova Dumka Publ., 1981. 316 p.

Tokar', I. G., Zin'kovskii, A. P., Adamenko, A. Ya., Rzhavin, L. N., Konovalov, V. I. Evaluating the vibrational stress state of turbine blades with paired shrouding. Strength of Materials, 1986, vol. 18, no. 4, pp. 511-515.

Pridorozhnyi, R. P., Zinkovskii, A. P. Merkulov, V. M., Sheremet’ev, A. V., Shakalo, R. Yu. Calculation-and-experimental investigation on natural frequencies and oscillation modes of pairwise-shrouded cooled turbine blades. Strength of Materials, 2019, vol. 51, no. 6, pp. 817-827.

Zin'kovskii, A. P., Adamenko, A. Ya., Buslenko, I. N., Tokar', I. G. Resonant vibrations of shrouded blades with differing frequencies with clapper interference. Strength of Materials, 1994, Vol. 26, No. 11, pp. 821-824.

Gorodetskii, S. S., Gryaznov, B. A., Nalimov, Yu. S. Issledovanie zakonomernostej raspredelenija vibronaprjazhenij i chastot kolebanij parnyh lopatok turbiny [Investigation of the laws of distribution of vibratory stresses and frequencies of vibration of paired turbine blades]. Problemy prochnosti – Strength of Materials, 1974, vol. 6, no.9, pp. 1096-1100.

Matveev, V. V., Tokar, I. G., Gorodetskii, S. S., Roitman, A. B. Issledovanie dempfirujushhej sposobnosti poparno bandazhirovannyh turbinnyh lopatok v zavisimosti ot uslovij soprjazhenija ih bandazhnyh polok [Damping capacity of paired shrouded turbine blades in relation to shroud contact conditions]. Problemy prochnosti – Strength of Materials, 1978, vol. 10, no. 10, pp. 962-966.

Zin'kovskii, A. P., Smertyuk, M. V., Matveev, V. V., Tokar', I. G., Adamenko, A. Ya. Rezonansnye kolebanija sterzhnevyh modelej turbinnyh lopatok s sostavnym hvostovikom [Resonance vibrations of rod models of turbine blades with sectional christmas-tree roots]. Problemy prochnosti – Strength of Materials, 1984, vol. 16, no. 9, pp. 1314-1319.

Shakalo R. Yu., Pridorozhnyy R. P., Yakushev Yu. V., Merkulov V. M., Zin'kovskii A. P. Dempfirovanie kolebanij ohlazhdaemyh poparno bandazhirovannyh rabochih lopatok turbin [Damping of vibrations of pairwise shrouded cooled turbine blades]. Aviacijno-kosmicna tehnika i tehnologia – Aerospace technic and technology, 2019, no. 7 (159), pp. 109– 113. (in Russian).

Adamenko, A. Ya., Tokar', I. G., Matveev, V. V. K metodike issledovanija dempfirujushhej sposobnosti lopatok turbomashin v uslovijah vozdejstvija temperatury i centrobezhnyh sil [A method of examining the damping capacity of vanes of turbomachines under the effect of temperature and centrifugal forces]. Problemy prochnosti – Strength of Materials, 1983, vol. 15, no. 7, pp. 949-953.

Adamenko, A. Ya., Tokar', I. G., Zin'kovskii, A. P., Matveev, V. V. Dempfirovanie kolebanij modelej turbinnyh lopatok s sostavnym hvostovikom [Vibration damping in models of turbine blades with a composite root]. Problemy prochnosti – Strength of Materials, 1984, vol. 16, no. 11, pp. 1617-1622.