ANALYSIS OF EFFICIENCY WASTE HEAT RECOVERY THERMORESSURE-EJECTOR REFRIGERATING MACHINE

Дмитро Вікторович Коновалов

Abstract


One of the ways to increase the energy efficiency of ejector refrigerating machines is to use of thermopressor technologies, which are based on to use of the process of thermogasdynamic compression. This process consists in contact cooling and at the same time increasing the gas or steam pressure. The thermopressor application in the ejector refrigerating machines cycle installed at the outlet of the ejector, allows, by increasing the pressure during vapour contact cooling to a saturation tempera-ture, to increase the ejection coefficient U and, accordingly, the thermal coefficient z. A number of refrigerants were chosen for analysis of cycle of ejector refrigerating machines, among which those traditionally is used for ejector refrigerating ma-chines, and a number of other refrigerants that can be used in ejector refrigerating machines based on the possibility of using the thermopressor. It is possible to in-crease the ejector refrigerating machines efficiency by using the thermopressor while ensuring a greater temperature difference. With the temperature difference 60–100 oC, the relative pressure increase is mostly positive. The following refrigerants have the most significance: R717, R134a, R227ea, R1234ze(E), R1234yf. Analysis of the ejector refrigerating machines scheme by using the thermopressor shows that the greatest efficiency at the highest possible boiling points in the generator tg is the refrigerants: R142b, R600, R1233zd(Е), R245fa.

Keywords


ejector; thermopressor; refrigerant; thermal coefficient

References


Zakharov, Yu. V. Sudovye ustanovki kondicionirovaniya vozduha i holodil'nye mashiny [Ship installations of air conditioning and refrigerating machines]. SPb, Shipbuilding Publ., 1994. 504 p.

Elbel, S. Historical and present developments of ejector refrigeration systems with emphasis on transcritical carbon dioxide airconditioning. International Journal of Refrigeration, 2011, no. 34(7), pp. 1545-1561.

Radchenko, N. And., Konovalov, D. V. Holodil'nye teploispol'zuyushchie cikly s prime-neniem effekta teplovoj kompressii [Refrig-wide waste heat recovery cycles with the effect of the heat of compression]. Aviacijno-kosmicna tehnika i tehnologia - Aerospace technic and technology, 2008, no. 8(55), pp. 111-115.

Zakharov, Y. V., Andreev, L. M., Lohmus, A. A. Rashevsky, I. A. Rezul'taty ispytanij eksperimental'noj fre-onovoj ezhektornoj holodil'noj mashiny v rezhime kondicionirovaniya vozduha [Results of tests of freon ejector refrigeration machine in air-conditioning]. Refrigeration, 1971, no. 3, pp. 16-20.

Zakharov, Yu. V., Shostak, V. P., Gaponov, S. A. K voprosu primeneniya legkokipyashchih veshchestv kak rabochih tel v sudovyh utilizacionnyh energeticheskih ustanovkah [To the question of the use of low-boiling substances as working bodies in ship recycling power plants]. Trudy NKI, 1970, no. 33. pp. 76-82.

Martynovskiy, V. S., Zhadan, S. Z. Issledovanie freonovoj ezhektornoj ustanovki kak generatora holoda [Study of freon ejector installation as GE-of nerator cold]. Refrigeration technique, 1953, no.4, pp. 55-58.

Zhadan, S. Z., Petrenko, V. A. Ispytanie polupromyshlennoj ezhektornoj holodil'noj mashiny na freone 142 v usloviyah litejnogo proizvodstva [Testing of industrial ejector refrigeration machine on freon 142 in the conditions of foundry production]. Refrigeration engineering and technology, 1978, no. 26, pp. 72-77.

Nehdi, E., L. Kairouani, L., Bouzaina, M., Performance analysis of the vapour compression cycle using ejector as an expander. Int J Energ Res., 2007, no. 31, pp. 364-375.

Takeuchi, H., Nishijima, H., Ikemoto, T., World’s first high efficiency refrigeration cycle with two-phase ejector. SAE World Congress, 2004.

Elbel, E., Hrnjak, P. S. Experimental validation of a prototype ejector designed to reduce throttling losses encountered in transcritical R744 system operation. International Journal of Refrigeration, 2008, no. 3, pp. 411-422.

Bergander, M. J. New regenerative cycle for vapor compression refrigeration. Final Scientific Report. Madison, CT, USA.

Radchenko, A., Radchenko, M., Trushliakov, E., Kantor, S., Tkachenko, V. Statistical method to define rational heat loads on railway air conditioning system for changeable climatic conditions. The 5th International Conference on Systems and Informatics: ICSAI 2018, 2018, pp. 1308-1312.

Trushliakov, E, Radchenko, M., Radchenko, A., Kantor, S., Zongming, Y. Statistical approach to improve the efficiency of air conditioning system performance in changeable climatic conditions. The 5th "International Conference on Systems and Informatics: ICSAI 2018, 2018, pp. 1303-1307.

Vulis, L. A. Termodinamika gazovyh potokov [Thermodynamics of gas flow]. Moscow, Gosenergoizdat Publ., 1950. 304 p.

Stepanov, I. R., Chudinov, V. I. Nekotorye zadachi dvizheniya gaza i zhidkosti v kanalakh i truboprovodakh energoustanovok [Some problems of the gas and liquid motion in the channels and pipelines of power plants]. Leningrad, The Science Publ., Leningrad department, 1977. 199 p.

Prigogine, I., Kondepudi, D. Sovremennaya termodinamika. Ot teplovyh dvigatelej do dissipativnyh struktur [Modern thermodynamics. From heat engines to dissipative structures]. Moscow, Mir Publ., 2002. 461 p.

Zhivitsa, V. I. Promezhutochnye ohladiteli s termopressorom dlya dvuh stupenchatyh ammiachnyh holodil'nyh ustanovok [Intercooler with dermabrassion two step ammonia refrigeration]. Refrigeration technique, 2002, no. 5, pp. 18-20.

Konovalov, D., Kobalava, H. Efficiency Analysis of Gas Turbine Plant Cycles with Water Injection by the Aerothermopressor. In: Ivanov V. et al. (eds) Advances in Design, Simulation and Manufacturing II. DSMIE 2019. Lecture Notes in Mechanical Engineering. Springer, Cham, 2019, pp. 581-591.

Sokolov, E. Y., Singer, N. M. Strujnye apparaty [Jet apparatuses]. Moscow, Energy Publ., 1970. 288 p.

Zhelezny, V. P., Semenyuk, Y. V. Rabochie tela parokompressornyh holodil'nyh mashin: svojstva, analiz, primenenie [Working bodies of steam-compressor refrigerating machines: properties, analysis, application: monograph]. Odessa, Phoenix Publ., 2012. 420 p.




DOI: https://doi.org/10.32620/aktt.2019.8.09