STRUCTURE FUNCTION OF ASYMMETRICAL CYLINDRICAL VORTEX TRACTS AND SURFACE ROUGHNESS ACCOUNTING ON HYDRAULIC LOSSES IN THEM

Ирина Алексеевна Воронько, Дмитрий Игоревич Завистовский

Abstract


The aim of this work is the analysis of the structure of the asymmetrical cylindrical vortex tracts to determine the form of structure function, and limiting the circle of factors affecting travel loss. The analysis of theoretical and experimental works of foreign and domestic authors was done. The analysis has shown that the active development of new ones and improvement of existing injection and mixture formation units, front-line devices of different types of heat engines is carried out. According to many researchers, further improvement of pre-flaming processes provides ample opportunities to improve operational properties of flight vehicles heat engines. The analytic method of definition of structure function of asymmetrical cylindrical vortex tracts which are the base of injector units for air-feed jet burners and technological gas-generators has been proposed. The researches of the authors point to a significant effect of the asymmetry of a cylindrical vortex tract on travel loss in it. The analysis of cylindrical vortex tracts structure and obtaining structure function for them lets determine the hydraulic loss coefficient in single cell with given geometric parameters. The features of asymmetrical cylindrical vortex tracts geometrical characteristics with the account of already known relations for cylindrical vortex tracts defining regular structure of symmetrical cylindrical vortex tracts have been considered. The physical meaning and influence of structure function on hydraulic loss in cylindrical vortex tracts and also community of relations given for limited and cylindrical vortex tracts has been defined. The tracts with the same dimensions of grooves on bush and body were considered. These tracts confirm positive effect at the organization of mixing and atomizing liquids and heat transfer processes. Qualitative ideas about the process of flow in vortex tracts also let consider the cylindrical vortex tracts with the same grooves. The method of impact of surface roughness accounting on hydraulic losses in cylindrical vortex tracts has been proposed. The known Altshul's formula transformed for cylindrical vortex tracts has been obtained.

Keywords


structure function, cylindrical vortex tract, technological gas-generator, injector units, hydraulic characteristics of CVT, surface roughness

References


Grushenko, A. M. Zhidkostnye i gazozhidkostnye forsunki s vzaimno perekreshchivayushchimisya kanalami i ikh ispol'zovanie dlya raspyleniya topliv teplovykh dvigatelei letatel'nykh apparatov. Dis. … kand. tekhn. nauk [Liquid and gas-liquid injectors with mutually intersecting channels and their using for propellant atomizing in heat engines of flight vehicles]. Khar'kov, Khar'k. aviats. in-t. Publ.,1987. 231 p.

Zavistovskii, D. I. Metody rascheta tsilindricheskikh vikhrevykh traktov raketnykh i vozdushno-reaktivnykh dvigatelei. Dis. … kand. tekhn. nauk [Calculation methods of cylindrical vortex tracts of rocket and air-breathing engines]. Khar'kov, Khar'k. aviats. in-t. Publ., 2003. 174 p.

Govard, K. P. Kharakteristiki teploperedachi i gidravlicheskogo soprotivleniya teploobmennykh poverkhnostei so skoshennymi kanalami i poverkhnostei iz steklokeramiki [Heat transfer and hydraulic resistance characteristics of heat-exchange surfaces with sloping channels and surfaces from glass-ceramic]. Energeticheskie mashiny i ustanovki: Tr. amer. ob-va inzhenerovmekhanikov – Journal of engineering for power. Transactions of the ASME, 1965, ser. A, no. 1, pp. 85-101.

Orlin, S. A. Eksperimental'noe issledovanie teploobmena i gidravlicheskogo soprotivleniya v kol'tsevykh traktakh s komplanarnymi kanalami []. Voprosy dvigatelestroeniya Tr. MVTU – Engine building questions, MHTS. Moskva, MVTU, 1984, no. 417, pp. 9-22.

Morozova, I. V. Usovershenstvovanie protsessov v kamere sgoraniya teplovykh dvigatelei putem elektrofizicheskogo vozdeistviya na uglevodorodnoe toplivo. Dis. … kand. tekhn. nauk [Improvement of processes in combustion chamber of heat engines by electrophysical impact on hydrocarbon propellant]. Kiev, Nats. aviats. un-t. Publ., 2016. 159 p.

Kiselev A. S. Optimizatsiya shtyrevykh forsunok dlya kamery sgoraniya moshchnogo ZhRD [Optimization of pin injectors for combustion chamber of power LPRE]. Trudy XXXII, sb. nauch. tr., Fed. kosm. agentstvo, NPO Energomash im. ak. V. P. Glushko [Proceedings XXXII, Federal space agency, NPO Energomash], Moscva, 2015. pp. 4-22.

Eliott, R. M. Development of a gas-liquid injector for liquid rocket engine. Proc. 20th International Congress of Mechanical Engineering, November 15-20, 2009, Gramado, RS, Brazil. Available at: http://www.abcm.org.br/anais/cobem/2009/pdf/COB09- 1971.pdf (аccessed 12.05.2017).




DOI: https://doi.org/10.32620/aktt.2017.6.02