РАСЧЕТНО-ЭКСПЕРИМЕНТАЛЬНЫЙ АЛГОРИТМ НАЗНАЧЕНИЯ РЕЖИМОВ ЛАЗЕРНОГО УДАЛЕНИЯ ЛАКОКРАСОЧНЫХ ПОКРЫТИЙ

Сергей Игоревич Планковский, Евгений Владимирович Цегельник, Петр Иванович Мельничук, Владислав Игоревич Лебедь

Abstract


An algorithm that allows to determine the technological parameters of pulsed laser surface cleaning ftom parts of aluminum alloy from the condition of anodized layer preservation is proposed. To determine the allowable modes, experimental data are used to determine the ablation threshold for the coating components and the critical parameters of the anodized layer treatment. It is shown that the number of successive pulses required to remove the coating layer at a known intensity and duration of the radiation pulse can be determined using experimental data on the depth of ablation under the action of a unit pulse.


Keywords


laser surface cleaning; ablation; paint stripping

References


Then, M.J. The Future of Aircraft Paint Removal Methods [Electronic resource] : Master of Science Thesis : Logistics Management / Air Force Institute of Technology. Wright-Patterson AFB, 1989. 169 p. URL: http://www.dtic.mil/dtic/tr/fulltext/u2/a214946.pdf. (last accessed: 02.11.2014).

Weissling, D.H., Wiedmann, S.L., Solomon, D.P. A Large-Scale Robotic System for Depainting Advanced Fighter Aircraft [Text] // SAE International Journal of Aerospace. 2011. Vol. 4, iss. 2. P. 1125–1132.

Robotic Laser Coating Removal System [Electronic resource] : Final Technical Report / Concurrent Technologies Corp., Oklahoma City Air Logis- tics Center, Air Force Research Laboratory ; auth. J. Arthur [et al.]. No. WP- 0526. Wright-Patterson AFB, 2008. 117 p. URL: http://www.dtic.mil/dtic/tr/full- text/u2/a608206.pdf. (last accessed: 11.02.2015).

Анисимов С. И., Лукьянчук Б. С. Избранные задачи теории лазер- ной абляции // Успехи физических наук. 2002. Т. 172, № 3. С. 301–333.

Sobol, E.N. Phase Transformations and Ablation in Laser-Treated Solids [Text] / New York : John Wiley and Sons, 1995. 332 p.

Моделирование короткоимпульсной лазерной абляции методом молекулярной динамики: механизмы эжекции материала и формирования наночастиц [Текст] / Л.В. Жигилей и др. // Синтез наноразмерных материалов при воздействии мощных потоков энергии на вещество : моно- графия / А.В. Булгаков и др. Новосибирск : ИТ СО РАН, 2009. Гл. 7. С. 147–220.

Zhigilei, L.V., Garrison, B.J. Microscopic mechanisms of laser abla- tion of organic solids in the thermal and stress confinement irradiation re- gimes [Text] // Journal of Applied Physics. 2000. Vol. 88, iss. 3. P. 1281– 1298.

Influenced of threshold fluence, absorption coefficient and thermal loading in laser paint removal mechanisms [Text] / M.K.A.A. Razab, M.S. Jaafar, A.A. Rahman et al. // Environment, Energy and Applied Technology ICFEEE 2014 : proc. of the Int. Conf. on Frontier of Energy and Environment Engineering (Taiwan, Dec. 6–7, 2014). CRC Press, 2015. P. 885– 891.

Accumulation effects in laser ablation of metals with high-repetition-rate lasers [Text] / G. Raciukaitis, M. Brikas, P. Gecys, M. Gedvilas // High- Power Laser Ablation VII : proc. of SPIE 7005 conf. (Taos, Apr. 20, 2008). SPIE, 2008. P. 2L-1–2L-11.

Планковский С. И. Экспериментально-расчетная методика определения ограничений режимов лазерной очистки деталей из алюминиевых сплавов [Текст] / С. И. Планковский, Е. В. Цегельник, П. И. Мельничук, Н. А. Чащин // Вопросы проектирования и производства конструкций летательных аппаратов : сб. науч. тр. / Нац. аэрокосм. ун-т им. Н. Е. Жуковского «ХАИ». Харьков, 2017. Вып. 3 (91). С. 61–70.


Refbacks

  • There are currently no refbacks.