ЕКСПЕРИМЕНТАЛЬНІ ДОСЛІДЖЕННЯ ПРОЦЕСУ ІМПУЛЬСНОГО ДОРНУВАННЯ ОТВОРІВ АВІАЦІЙНИХ КОНСТРУКЦІЙ ІЗ ТИТАНОВОГО СПЛАВУ ВТ-6С

Ирина Алексеевна Воронько, Юрий Анатольевич Воробьев, Юлия Юрьевна Донцова, Владимир Николаевич Степаненко

Abstract


The analysis of the use of titanium alloys in modern aviation production was carried out on the basis of reference sources. Based on the results of research studies and literature analysis, a fullscale experiment was conducted to study the effect of the geometric parameters of the mandrel, lubricant, negative allowance, the energy for impulse cold-hardening with a pneumatic impulse device МПИ-90M on the geometric parameters of the walls of hardened holes, including life fatigue of samples of titanium alloy ВT-6C.


Keywords


impulse cold-hardening; titanium alloys; mandrel; aviation structures

References


Конструкционные материалы в самолетостроении [Текст] / А.Г. Моляр, А.А. Коцюба, А.С. Бычков, О.Ю. Нечипоренко – Киев: КВИЦ, n2015. – 400 с.

Moiseyev, V.N. Titanium Alloys - Russian Aircraft and Aerospace Applications [Text] / 2006. Taylor and Francis, LLC, p. 207.

Edited by C. Leyens and M. Peters, Titanium and Titanium Alloys – Fundamentals and Applications [Text] / 2003. WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, p. 514

Materials Research Society, The Science, Technology, and Implementation of TiAl Alloys in Commercial Aircraft Engines [Text] / Vol. 1516. 2013, Mater. Res. Soc. Symp. Proc

American Society for Metals, Advanced materials & processes. 2003, ASM International

R.R. Boyer, New Titanium Applications on the Boeing 777 Airplane, 1992, JOM

R.R. Boyer, Titanium for Aerospace: Rationale and Applications, 1995, Kluwer Academic Publishers, Boston.

R.R. Boyer, An overview on the use of titanium in the aerospace industry, 1996, Materials Science and Engineering

Manfred Peters, Titanium Alloys for Aerospace Applications, Advanced Engineering Materials

Gerd Lütjering, James C.Williams, Titanium, 2nd edition, 2003, 2007, Springer-Verlag Berlin Heidelberg

James C. Williams, Edgar A. Starke, Jr., Progress in structural materials for aerospace systems, 2003 Acta Materialia Inc. Published by Elsevier Ltd

Application and Features of Titanium for the Aerospace Industry, NIPPON STEEL & SUMITOMO METAL TECHNICAL REPORT No. 106 JULY 2014.

Численное моделирование процесса импульсного дорнования отверстий авиационных конструкций из титановых сплавов с помощью LS-DYNA [Текст] / В.Е. Зайцев, Ю.А. Воробьев, И.А. Воронько // Открытые информационные и компьютерные интегрированные технологии. – Харьков Нац. аэрокосм. ун-т им. Н.Е. Жуковского «ХАИ», 2012. – Вып. 57.– С. 78-85.

Воробьев, Ю.А. Исследование технологии импульсного упрочнения дорнованием отверстий в авиационных изделиях из титановых сплавов [Текст] / Ю.А. Воробьев, И.А. Воронько // XVIII міжнародний конгрес двигунобудівників: Тези доп. / М-во освіти і науки України, Нац. аерокосм. ун-т ім. М.Є. Жуковського «ХАІ». – Х., 2013. – С. 149.

Упрочнение отверстий болтовых соединений в конструкциях из алюминиевых сплавов [Текст] - Производственная инструкция ПИ-6843. Изд. 4. - 1987. – 16 с.


Refbacks

  • There are currently no refbacks.