AIRCRAFT AERODYNAMIC CHARACTERISTICS DETERMINATION AT SUPERSONIC FLIGHT SPEEDS
Abstract
The aircraft aerodynamic characteristics at supersonic flight modes can be determined with a high level of accuracy through testing the aircraft in wind tunnels or through time-consuming three-dimensional and analytical computational methods. However, in certain cases when the aircraft aerodynamic characteristics are already known within a given Mach number range for supersonic flight, it is possible to develop a relatively simple mathematical model for the aircraft aerodynamic characteristics at supersonic speeds using the aerodynamic properties of the supersonic wing leading edge for flight speeds Mf ≥ 1.2M. The object of the study is the aircraft aerodynamic characteristics at supersonic flight speeds. The subject of the study is the impact of the aircraft geometric features on the mathematical model, which is used to determine its aerodynamic characteristics in the supersonic flight speed range. The study hypothesizes that to determine the aerodynamic characteristics of an aircraft at Mf ≥ 1.2, it is sufficient to identify the values of the aircraft aerodynamic parameters at a flight speed of Mf =1.2 and then use aerodynamic analytical dependencies for the supersonic wing leading edge to determine these parameters at Mf ≥ 1.2. A mathematical model of the aircraft aerodynamic characteristics in the supersonic flight speed range was developed. Coefficients of drag polar and zero-lift drag for the reference mode Mf= 1.2 have been identified by the developed mathematical model. Then, the Mach number range for the aerodynamic characteristics of the NASA 1044 configuration has been extended to supersonic speeds of Mf= 1.8…4.0. The resultsof the aerodynamic calculations, obtained in the form of dependencies of the drag polar and zero-lift drag coefficients on Mach number, and the aircraft polar plot, have been compared with known NASA data for the 1044 configuration aircraft. The average modeling error of the aircraft aerodynamic characteristics in the supersonic speed range is less than 3%.
Keywords
Full Text:
PDFReferences
Morgenstern, J. Advanced Concept Studies for Supersonic Commercial Transports Entering Service in the 2018-2020 Period Phase 2 / J. Morgenstern [and other] // NASA Report. – 2015. – № CR—2015-218719. – 396 р. Available at: https://ntrs.nasa.gov/citations/20150015837 – (accessed 01.09.2022).
Viviani, A. CFD design capabilities for next generation high-speed aircraft. / A. Viviani, A. Aprovitola, G. Pezzella, C. Rainone // Acta Astronautica. – 2021. – № 178. – pp. 143–158. DOI: https://doi.org/10.1016/j.actaastro.2020.09.006
Grebenikov, A. G. Metod opredeleniya aerodinamicheskikh kharakteristik modifikatsii uchebno-trenirovochnogo samoleta pri zamene dvigatelya [Tekst] / A. G. Grebenikov, A. M. Gumennii, A. A. Sobolev, I. P. Suntsov // Otkritie informatsionnie i kompyuternie integrirovannie tekhnologii. – 2018. – № 79. – S. 5–23.
Shevchenko, M. A. Vibіr skladu, parametrіv robochogo protsesu і rezhimu roboti silovoї ustanovki lіtalnogo aparatu z nadzvukovoyu kreiserskoyu shvidkіstyu polotu [Tekst] / M. A. Shevchenko // Aviatsionno-kosmicheskaya tekhnika i tekhnologiya. – 2021. – № 3(171). – S. 32–41. DOI: https://doi.org/10.32620/aktt.2021.3.04
Kislov, O. V. Development of a method for selecting a cruising mode and engine control program of a ramjet aircraft / O. V. Kislov, M. A. Shevchenko // Eastern-European Journal of Enterprise Technologies. – 2021. – № 3 (3 (111)). – pp. 6–14. DOI: https://doi.org/ 10.15587/1729-4061.2021.233850
Chmovzh, V. V. Modernizatsiya izmeritelnoi sistemi sil i momenta v uchebnoi aerodinamichesskoi trube T-5 [Tekst] / V. V. Chmovzh, A. B. Kasyanenko, V. A. Zakharenko, // Otkritie informatsionnie i kompyuternie integrirovannie tekhno-logii. – 2012. – № 53. S. 58–62.
Yugov, O. K. Osnovi integratsii samoleta i dvigatelya [Tekst] / O. K. Yugov, O. D. Selivanov. – M. : Mashinostroenie, 1989. – 304 s.
DOI: https://doi.org/10.32620/oikit.2024.100.09
Refbacks
- There are currently no refbacks.