Aerospace Technic and Technology

In the simplest cases, P-, PI- and PID-controllers with rigid (unchanged) parameter settings are used to control technological processes. If the mathematical model of the control object contains unknown disturbing influences and parameters that change during the control process, then a digital control system with a learning model should be used. The tasks of control, analysis and modeling of various processes and systems are solved using their mathematical models. The choice of a model is dictated by the conditions of implementation and the requirement of adequacy. The problem of developing control algorithms under uncertainty occupies one of the central places in modern control theory. To solve the arising problems of structural and parametric identification, as a rule, methods, and algorithms of the theory of adaptive control systems are used. The application of the principles of adaptation allows to ensure high accuracy of modeling with a significant change in the dynamic properties of the system under study, to unify individual subsystems and their blocks; reduce the development and debugging time of the system. This article discusses the problem of studying a digital adaptive system for turning the blades of guide apparatus (GA) of an axial compressor of gas turbine engines (GTE). The aim of the study is to increase the efficiency of the control system for turning the blades of the GA using a digital adaptive system. The gas-dynamic stability of the GTE axial compressor under changes in external conditions and engine throttling is provided by air bypass and turning the blades of the first and last compressor stages. The statement of the problem of synthesis of the system of adaptive control of the rotation of the blades of the GA compressor of the gas turbine engine is carried out. A mathematical model of the ACS in the canonical form “model of the system in the state space” and an algorithm for turning the blades of the GA using an adaptive PI-controller have been developed. Simulation modeling of ACS was carried out using the Matlab / Simulink software package. When implementing an adaptive PI-controller, the pressure deviation downstream of the compressor stage from the required value is reduced to 0.4 %.

digital system; adaptive PI-controller; simulation modeling; axial compressor guide vanes; gas turbine engine; model of the system in the state space

Holtsov, A. S. Metody optimizatsii i adaptivnogo upravleniya v mashinostroenii [Optimization and adaptive control methods in mechanical engineering]. Volgograd, VolgGTU Publ., 2009. 168 p.

Rotach, V. Ya. Teoriya avtomaticheskogo upravleniya [Automatic control theory]. Moscow, MEI Publ., 2004. 400 p.

Epifanov, S. V., Kuznetsov, B. I., Bogaenko, I. N. Sintez sistem upravleniya i diagnostirova-niya gazoturbinnykh dvigatelei [Synthesis of control systems and diagnostics of gas turbine engines]. Kyiv, Tekhnika Publ., 1998. 312 p.

Cherkasov, B. A. Avtomatika i regulirovanie vozdushno-reaktivnykh dvigatelei [Automation and regulation of jet engines]. Moscow, Mashinostroenie Publ., 1988. 360 p.

Holtsov, A. S. Adaptivnye sistemy avtomaticheskogo upravleniya nelineinymi ob"ektami [Adaptive systems for automatic control of nonlinear objects]. Oryol, Akademiya FAPSI Publ., 2001. 156 p.

Granichin, O. N. Randomizirovannye algoritmy otsenivaniya i optimizatsii pri pochti proizvol'nykh pomekhakh [Randomized estimation and optimization algorithms with almost arbitrary noise]. Moscow, Nauka Publ., 2003. 291 p.

Izerman, R. Tsifrovye sistemy upravleniya [Digital control systems]. Moscow, Mir Publ., 1984. 541 p.