Improvement of mixing processes in the combustion chamber of thermal engines

Ирина Владимировна Морозова, Юрий Матвеевич Терещенко

Abstract


Improving the mixture formation and combustion of various types of fuels in the combustion chamber is one the ways for the development of modern engines. Requirements for reliability, durability, tactical and technical characteristics and, importantly, for environmental friendliness pose new problems in this area of science and technology. This is largely determined by the degree of perfection individual processes in the engine operating cycle. An increase in power in accordance with the requirements for an increase in energy saturation and productivity of transport vehicles is limited by the resource and reliability of the engine due to an increase in thermal and mechanical loading of the main parts. The expansion the scope of application is limited by increased emissions harmful substances with exhaust gases, levels noise and vibration a running engine. Consumption increasing amounts liquid fuels requires further improvements in fuel efficiency. The main process of the working cycle a piston engine is the process fuel combustion. Fuel efficiency, power, service life and environmental performance depend on its quality. Therefore, the greatest attention is paid to the improvement of this process. The development of modern engines consists in the study and improvement of the working process on liquid and gaseous fuel components. Based on the foregoing and in accordance with the urgency of this problem, the method of electromagnetic action on fuel was studied. The results of experimental studies have shown the effectiveness the use of electro physical effects on hydrocarbon fuel to improve the parameters and characteristics of heat engines. It has been established that the electro physical effect on hydrocarbon fuel increases the completeness of fuel combustion by 4 ... 6% and reduces the deposition of carbon deposits in the combustion chamber of a gas turbine engine by 20 ... 25%. Improvement the fuel combustion processes in the previous phases leads to a reduction in the afterburning phase, which entails a decrease in the exhaust gas temperature, a decrease in the concentration of carbon monoxide by 0.64 ... 0.7%, the concentration of hydrocarbons by 25 ... 35% and the concentration of nitrogen oxide by 12 ... 16%.

Keywords


mixture formation; combustion chamber of a heat engine; combustion chemical reaction rate; electromagnetic effect; activation energy; fuel; exhaust gases

References


Tereshchenko, Yu. M., Kulik, N. S., Mitrahovich, M. M. Teorija teplovih dviguniv [Theory of thermal engines]. Kiev, Publishing House of the National Aviation University Publ., 2015. 292 p.

Fedjakin, V. N., Lanshin, A. I., Nikolaeva, V. D. Prognoz razvitija aviacionnyh dvigatelej do 2030 g. [Forecast of the development of aircraft engines until 2030 g.]. Materialy konferencii Aviadvigateli XXI veka [Materials of the conference Aircraft engines of the XXI century], CIAM named after P. I. Baranova, Moscow, 2015, pp. 112-114.

Tereshchenko, Yu. M., Kulik, N. S., Lastivka, I. A. Teorija aviacionnyh trehkonturnyh turboreaktivnyh dvigatelej [Theory of aircraft three-circuit turbojet engines]. Kiev, Publishing House of the National Aviation University “NAU-Druk”, 2010. 116 p.

Litvinov, Yu. A., Borovik, V. O. Harakteristiki i ecplutastionny svoistva aviatsionnih turboreactivnih dvigatelei [Characteristics and performance properties of aircraft turbojet engines]. Moscow, Mashinostroenie Publ., 1995. 395 p.

Abraham, A. Yaderny mahnetizm [Nuclear magnetism]. Moscow, Inostrannaja literatura Publ., 1963. 551 p.

Morozova, I. V., Morozov, V. I. Decrease in the Concetration of Hazardous Components of Exhaust Gases from a Combustion Chamber of a Heat Engine. Nanostructured Materials for the Detection of CBRN, Springer, 2019, pp. 319-330.

Bely, O. V., Iskanderov, Yu. M., Muramovich, B. G. Jeffekt izmenenija svojstv uglevodorodnyh topliv pod vozdejstviem jelektricheskogo polja [Effect of changes in the properties of hydrocarbon fuels under the influence of an electric field]. Proceedings of the IAMRAS 2010, 12–14 April 2010, Moscow, 2010, vol. 2, pp. 83-94.

Morozova, I. V., Tereschenko, Yu. М., Маksimov, S. L. Change of heat engine performance by electro-physical influence on fuel. The Advanced Science Journal, 2016, vol. 2016, issue 02, pp. 45-49.

Baculin, V. I., Dubovkin, N. F. Enerhoyomkia goryuchia dlya aviatsionnikh raketnikh dvihateley [Energy-intensive fuels for aircraft rocket engines]. Moscow, Fizmatlit Publ., 2009. 400 p.

Belousov, V. N., Smorodin, S. N., Smirnova, O. S. Toplivo i teoriya horenya [Fuel and combustion theory]. St. Petersburg, St-PSTUPP Publ., 2011. 84 p.

Pogorletsky, D. S., Malygin, A. B., Kotylo, A. V. Perspektivy magnitnoj obrabotki uglevodorod-nyh topliv na avtotransporte [Prospects for magnetic processing of hydrocarbon fuels in vehicles]. Naukovij vіsnik Hersons'kogo derzhavnogo mors'kogo іnstitutu – Scientific Visnik of the Kherson Sovereign Marine Institute, 2013, no. 3, pp. 58–66.

Prudnikov, A. G., Volinskij, M. S., Sagalovich, V. I. Procesi smeseobrazovaniya i goreniya v vozdushno-reaktivnyh dvigatelyah [Mixing and combustion processes in air-breathing engines]. Moscow, Mashinostroenie Publ., 2003. 356 p.




DOI: https://doi.org/10.32620/aktt.2021.4sup2.04