CHOICE OF MODELS FOR ADAPTIVE CONTROL BY RELIABILITY OF INDUSTRIAL EQUIPMENT «ON STATE»

Микола Володимирович Кіяновський, Наталя Іванівна Цивінда, Андрій Валерійович Пікільняк, Володимир Васильович Третяк

Abstract


In materials of the resulted article methods are definite of estimation of the capacity of industrial equipment with the target of choice of the processes most suitable for research, on condition of authentication without the analysis of technical state and conclusion from exploitation, that will create the terms of adequacy in the decision of regulations and maintenance TOіR. The analysis is conducted of methods of a decision of capacity of industrial equipment with the target of choice of the processes most suitable for research of work of mountain and metallurgical equipment, on condition of authentication without the analysis of its technical state and without conclusion from exploitation shows that there can be such only functional methods. Of possibilities of the resulted methods orient comparison scientific search on implementation of researches on the method of the accumulated selection of summarizing parameter of a technical state as a sentinel function. Of researches providing is a target of terms of adaptive control of reliability and renewal of machinery of the mountain and metallurgical equipment based on the use of dynamic models of processes of loss of capacity. Also, a review is conducted of results of researches, concerning the prospect of the introduction of strategies of exploitation «on the state», that results in conclusion, that by the most effective path of the introduction of terms of adaptive process control of work and renewal of machinery of the mountain and metallurgical equipment is the use of dynamic models of reliability. Consonant to the analysis of all methods known in the modern science of decision of the put tasks in the world practice among tools and methods of control of the technical state of machine aggregates most effective to be a present method of control of violations of transmission functions of machinery under the action of bugs of making, editing, and exploitation, which develop in time. In the presented article lacks are removed of the strategy of exploitation on work, some so time in the programs TOіR probabilistic models were used of reliability of equipment, that was braked by the time application of terms of adequacy in the decision of regulations and maintenance TOіR by consideration of reasons of development of processes of degradation, their physical nature and types of bugs of equipment.

Keywords


decision of technical state; real-time mode; mountain and metallurgical equipment; technical diagnostics

References


Artobolevskyj, Y. Y., Bobrovnyczkyj, Yu. Y., Genkyn, M. D. Vvedenye v akustycheskuyu dynamyku mashyn [Introduction to the acoustic dynamics of machines]. Moscow, Mashynostroenie – Mechanical engineering Publ., 1979. 276 p.

Byrger, Y`.A. Texnycheskaya dyagnostyka [ Technical diagnostics]. Moscow, Mashynostroenie – Mechanical engineering Publ., 1978. 240 p.

Kyyanovskyj, N. V., Baskov, A. V. Sredstva y sy`stemы dlya bezrazbornoj ocenky texnycheskogo sostoyanyya gorno-metallurgycheskogo oborudo-vanyya [Tools and systems for the bezrazbornoy estimation of technical state of mountain and metallurgical equipment]. Chernaya metallurgyya – Black metallurgists Publ., 1992, pp. 23-27.

Kiyanovsky`j, M. V. Diagnostychne zabez-pechennya texnichnogo obslugovuvannya i remontu (TOiR) girny`cho-metalurgijnogo obladnannya [Diagnostic providing of technical service and repair (TOiR) of mountain and metallurgical equipment]. Kryvoi Rog, Vyd-vo «Oktantprynt» Publ., 2015. 364 p.

Vybracyya centrobezhnыx nagnetatelej pryrodnogo gaza. Normi y metodyka ocenky vybracynnogo sostoyanyya. (Obzornaya ynformacyya. Ser. Xymycheskoe mashynostroenye) [Vibration of centrifugal superchargers of natural gas. Norms and method of estimation of vibration state. (Survey information. Is grey. Chemical mashinostroenie]. Moscow, Institut nauchno-texny`cheskoj ynformacyy y texnyko-эkonomycheskyx yssledovanyj po xymycheskomu y` neftyanomu mashyostroenyyu Publ., 1990. 520 p.

Vlyyanye texnycheskogoobsluzhyvanyya na rost pry`bily y konkurentosposobnosty [Influencing of technical service on growth of income and competitiveness]. Pract. Lubr. and Maint, 1987, no. 3, pp. 13-16.

Genkyn, M. D, Soloveva, A. G. Vybro-akusty`cheskayady`agnosty`ka mashyn y mexany`zmov [Vibroakusticheskaya diagnostics of machines and machineries]. Moscow, Mashynostroenie – Mechanical engineering Publ., 1987. 288 p.

Nadezhnosty effektyvnost v texnyke [Reliability and efficiency in technique]. Moscow, Mashynostroenie – Mechanical engineering Publ., 1987, vol. 9: Texnycheskaya dyagnostyka [Technical diagnostic]. 344 p.

Moltzer, G. Razrabotka y oprobovaye metoda vybroakustycheskoj dy`agnostyky mashyn y ustanovok [Development and testing of method of vibroakusticheskoy diagnostics of machines and options]. Akdwiss DDK. Instr. Mech.” [Ber], 1986, no. 6, pp. 133-151.

KnuthTh. Raspoznavany`e ney`pravnostej y analyza vybracy`j – novie vozmozhnostyi texnyicheskogo obsluzhyvanyya [Recognition of neipravnostey and analysis of vibrations – new possibilities of technical service]. Masehinenschaden, 1988, no. 2, pp. 70-74.

Xotta, Tejtaka. Osnovы prymenenyya diagnostyky oborudovanyya [Bases of application of dіagnostiki equipmen] Purantoendzynyya PlantEng, 1988, no. 3, pp. 8-11.

Hills, Peter W. Texnycheskaya diagnostyka oborudovany`ya na osnove y`zucheny`ya dannыx o vyracyyax [Technical dіagnostika equipment on the basis of study of data about vibrations]. Int. Conf. Cond. NionitBrington, 21-23 May, 1986, Granfield, 1986, pp. 231-235.

Kiyanovskiy, M. V., Bondar, E. V. The increasin goffixe dmining machines resource rates by diagnostic main tenanceim-proving. Metallurgicaland Mining Industry, 2015, no. 3, pp. 292-297.

Kiyanovskyi, M. V., Tsyvinda, N. I. Control over the technical condition of mechanical components of industrial equipment base donenergy parameter of its deterioration. Kompleksne zabezpechennya yakosti texnologichny`x procesiv ta sy`stem. Materialy` X mizhnarodnoyi naukovo-prakty`chnoyi konferenciyi [Complex providing of quality of technological processes and systems. Materials of the Х international naoucovo-practichnoi conference], 29 - 30 april 2020, Chernigiv, vol. 1, pp. 35-37.

Tret`yak, V. V. Multyagentnaya systema synte- ma sinteza texnycheskyx reshenyj v oblasty ympulsnoj texnologyy dlya obъektov aэrokos-mycheskogo kompleksa [The Multiagentnaya system of synthesis of technical decisions in area of impulsive technology for the objects of aerospace complex ]. Procedings XXIV international conference «New Leading technolog sesin machse building», Rybachie, Ukraine, September 3–8, 2014, pp. 15.




DOI: https://doi.org/10.32620/aktt.2020.7.19

Copyright (c) 2020 Микола Володимирович Кіяновський, Наталя Іванівна Цивінда, Андрій Валерійович Пікільняк, Володимир Васильович Третяк