INCREASING THE EFFICIENCY OF APPLICATION OF ABSORPTION LITHIUM-BROMIDE CHILLER IN THE GAS TURBINE UNIT INTAKE AIR COMBINED COOLING SYSTEM

Андрей Николаевич Радченко, Богдан Сергеевич Портной, Сергей Анатольевич Кантор, Александр Игоревич Прядко

Abstract


The results of calculation of two stage gas turbine unit intake air cooling processes with previous cooling by absorption lithium-bromide chiller and deep cooling by ejector chiller are presented. The efficiency of the use of absorption lithium-bromide chiller cooling potential for changeable heat loads is analyzed. A scheme of cooling system with accumulating of surplus absorption lithium-bromide chiller cooling potential during decreased heat loads and its spending at increased heat loads has been proposed.


Keywords


two stage air cooling; litium-bromide chiller; ejector chiller; heat load; cooling capacity

References


Popli, Sahil., Rodgers, Peter,, Eveloy, Valerie. Trigeneration scheme for energy efficiency enhancement in a natural gas processing plant through turbine exhaust gas waste heat utilization. Applied Energy, 2012, no. 93, pp. 623–636.

Popli, Sahil., Rodgers, Peter,, Eveloy, Valerie. Gas turbine efficiency enhancement using waste heat powered absorption chillers in the oil and gas industry. Applied Thermal Engineering, 2013, no. 50, pp. 918–931.

Radchenko, A. N., Kantor, S. А. Metodologicheskiy podhod k racionalnomu proektirovaniju kombinirovannoi teploispolzuyushchey sistemy okhlazhdeniya vozdukha na vhode gazoturbinnoy ustanovky [Metodological aproaches of rational designing of combined waste heat recovery system for gas turbine unit intake air cooling]. Аviatsionno-kosmicheskaya tehnika i tehnologiya – Aerospace technics and technology, 2015, no. 4 (121), pp. 76–79.

Radchenko, A. N., Kantor, S. А. Metod vybora racionalnoy teplovoy nagruzky absorbcionno-ezhektornogo termotransformatora okhlazhdeniya vozdukha na vhode regenerativnyh GTU kompressornyh stanciy [The method of evaluation of rational heat load on absorption-ejector thermotransformer for cooling regenerative GTU intake air of compressor sta-tions]. Аvitsionno-kosmicheskaya tehnika i tehnologiya – Aerospace technics and technology, 2015, no. 5 (122), pp. 61–64.




DOI: https://doi.org/10.32620/aktt.2017.4.11