THE CONCEPT OF TECHNOLOGICAL SUPPORT FOR ESTABLISHING EFFECTIVE CONSTRUCTIONS OF DOMESTIC CIVIL AIRCRAFT FROM POLYMER COMPOSITE MATERIALS IN MODERN CONDITIONS

Алексей Викторович Андреев, Виталий Евгеньевич Гайдачук, Андрей Валерьевич Кондратьев, Олег Владимирович Орлов

Abstract


Based on the analysis and synthesis of domestic and foreign experience, a general conceptual approach to the creation of new civil aircraft has been developed. A particular case of this approach is the concept of designing and manufacturing aggregates of polymer composite materials. The concept includes a classifier of technological processes for manufacturing composite aggregates and a complex criterion of their effectiveness. The classifier is based on the comparison of the technological parameters (characteristics) required for the project implementation in the conditions of the modern domestic production complex. The system of conceptual assessment of the effectiveness of technological support of the project implementation allows comparing the number and completeness of particular criteria with the goals and objectives of the analysis.

Keywords


сivilian transport aircraft; polymer composite materials; the concept of design and production; efficiency; a comprehensive criterion

References


Sovetskaya grazhdanskaya aviatsionnaya tekhnika na mirovom rynke [Soviet civil aviation equipment in the world market]. Moscow, Aviaeksport Publ., 1984. 104 p.

Balabuyev, P. V. ANTK im. O.K. Antonova – lider ukrayins'koyi aviapromyslovosti [ANTONOV ASTC O. K. Antonov – the leader of Ukrainian aircraft industry]. Aviatsionno-kosmicheskaya tekhnika i tekhnologiya, 2000, no. 15, pp. 38 – 41.

Anisenko, V. G. Antonov O. K. – mnogo-grannost' talanta [Antonov O. K. – the versatility of talent]. Kyiv, AeroKhobbi Publ., 2006. 184 p.

Antonov, O. K. Kompozytsiyni materialy dlya aviabuduvannya [Composite materials for aerospace]. Visnyk AN URSR, 1975. no. 12, pp. 68 – 71.

Kiva, D. S. Etapy stanovleniya i nachala razvernutogo primeneniya polimernykh kompozitsionnykh materialov v aviakonstruktsiyakh otechestvennogo naznacheniya (1970 – 1995 gg.) [Stages of formation and beginning of expand use of polymer composite materials in aviation constructions for domestic purposes (1970 - 1995 years)]. Aviatsionno-kosmicheskaya tekhnika i tekhnologiya, 2014, no. 6 (113), pp. 5– 16.

Balabuev, P. V. Opyt primeneniya kompozitsionnykh materialov v transportnoi aviatsii [Experience in the use of composite materials in transport aircraft]. Kompozitsionnye materialy, 1991, pp. 27 – 36.

Bychkov, S. A., Kotsiuba, A. A. Sostoyanie i problemy primeneniya novykh konstruktsionnykh materialov v otechestvennykh grazhdanskikh samoletakh v sovremennykh usloviyakh. Soobshchenie 2. Polimernye kompozitsionnye materialy v otechestvennykh grazhdanskikh samoletakh v sovremennykh usloviyakh (1995-2015). Pervoprichiny i zakonomernosti vnedreniya [State and problems of usinf of new construction materials in domestic civil aircraft in modern conditions. Report 2. Polymer composites in domestic civil aircrafts in the modern conditions (1995-2015 years): original reasons and principles of implementation]. Aviatsionno-kosmicheskaya tekhnika i tekhnologiya, 2016, no. 6(133), pp. 4 – 14.

Balabuyev, P. V. Kontseptsiya sozdaniya tya-zhelogo transportnogo samoleta [The concept of creating a heavy transport aircraft]. Dr. eng. sci. diss. Kharkov, Kharkov Aviation Institute Publ., 1987. 47 p.

Kiva, D. S. Kontseptsiya sozdaniya legkogo mnogotselevogo samoleta korotkogo vzleta i posadki [The concept of creating a light multi-purpose short takeoff and landing aircraft]. Dr. eng. sci. diss. Kharkov, Kharkov Aviation Institute Publ., 1990. 51 p.

Bychkov, S. A. Kontseptsiya primeneniya i realizatsiya impul'snykh tekhnologii listovoi shtampovki v usloviyakh opytnogo i seriinogo proizvodstva transportnykh samoletov [The concept of application and implementation of pulsed sheet-stamping technologies in conditions of pilot and serial production of transport aircraft]. Dr. eng. sci. diss. Kharkov, Kharkov Aviation Institute Publ., 1991. 55 p.

Muravchenko, F. M. Kontseptsiya sozdaniya i dovodki semeistva vysokoresursnykh TRVD s bol'shoi stepen'yu dvukhkonturnosti [The concept of the creation and debugging of a family of high-resource TRDVs with a large degree of double-circuit]. Dr. eng. sci. diss. Kharkov, Kharkov Aviation Institute Publ., 1991. 56 p.

Bol'shoi tolkovyi slovar' russkogo yazyka [The Great Dictionary of the Russian Language] (ed.: Kuznetsov S.A.). St. Petersburg, «Norint» Publ., 2001. 1536 p.

Kotsiuba, A. A. Formirovanie kriteriya effektivnosti proektirovaniya konstruktsii grazhdanskikh samoletov iz polimernykh kompozitov na etape vybora ikh sostava [Formation of the efficiency criterion for designing civil aircraft designs from polymer composites at the stage of their composition selections]. Nauchnye trudy Natsional'nogo aerokosmicheskogo universiteta im. N.E. Zhukovskogo «KhAI» «Voprosy proektirovaniya i proizvodstva konstruktsii letatel'nykh apparatov» [Proc. of the National Aerospace University Kharkov Aviation Institute "Issues of design and manufacture of flying vehicles"], 2016, vol. 3 (87), pp. 19 – 31.

Kotsiuba, A. A. Formirovanie effektivnosti etapa tekhnologicheskoi podgotovki proizvodstva agregatov grazhdanskikh samoletov [Formation of efficiency of technological preparation stage of production of civil aircrafts’ aggregates]. Aviatsionno-kosmcheskaya tekhnika i tekhnologiya, 2017, no. 2(137), pp. 60 – 70.

Haydachuk, O. V. Zahal'ni pryntsypy pidvyshchennya bezpeky tekhnolohichnykh protsesiv vyrobnytstva konstruktsiy lital'nykh aparativ [General principles of improving security processes pro-struction of aircraft structures]. Nauchnye trudy Natsional'nogo aerokosmich-eskogo universiteta im. N.E. Zhukovskogo «KhAI» «Voprosy proektirovaniya i proizvodstva kon-struktsii letatel'nykh apparatov» [Proc. of the Na-tional Aerospace University Kharkov Aviation Institute "Issues of design and manufacture of flying vehicles"], 2003, vol. 4 (35), pp. 7 – 28.

Kotsyuba, A. A., Babenko, M. N., Gaidachuk, A. V., Kondrat'ev, A. V. Kategoriya bezopasnosti kak element effektivnosti otechestvennykh gra-zhdanskikh samoletov [The safety category as an element of the effectiveness of domestic civil aircraft]. Nauchnye trudy Natsional'nogo aero-kosmicheskogo universiteta im. N.E. Zhukovskogo «KhAI» «Voprosy proektirovaniya i proizvodstva konstruktsii letatel'nykh apparatov» [Proc. of the National Aerospace University Kharkov Aviation Institute "Issues of design and manufacture of flying vehicles"], 2017, vol. 1 (89), pp. 7 – 15.

Tsyplakov, O. G. Nauchnye osnovy techn-logii kompozitnykh voloknistykh materialov [Scientific foundations of the technology of composite fibrous materials]. – Perm', Perm book Publ., 1975. Part 2. 274 p.

Gajdachuk, V. E. Teoreticheskie osnovy tehnologicheskoj podgotovki proizvodstva aviakonstrukcij iz kompozicionnyh materialov. Diss. dokt. tekhn. nauk [Theoretical basis of technological preparation of manufacture of composite materials aviakonstruktsy. Dr. eng. sci. diss. 05.07.03]. Kharkov, Kharkov Aviation Institute Publ., 1979. 438 p.

Zabashta, V. F. Tekhnicheskaya podgotovka proizvodstva konstruktsii iz kompozitsionnykh materialov [Technical preparation of production structures made of composite materials]. Kyiv, Tehnіka Publ., 1993. 147 p.

Bychkov, S. A., Haydachuk, O. V., Haydachuk, V. Ye., Hrechka, V. D., Kobrin, V. M. Tekhnolohiya vyrobnytstva lital'nykh aparativ iz kompozytsiynykh materialiv (ed.: Haydachuk V. Ye.) [Technology of production of aircraft with composite materials]. Kyiv, ISDO Publ., 1995. 376 p.

Mason, K. Autoclave Quality Outside The Autoclave? High-Performance Composites, 2006, no. 14(2), pp. 44 – 49.

Han, N. L., Suh, S. S., Yang, J. M., Hahn, H.T. Resin Film Infusion of Stitched Stiffened Composite Panels. Composites: Applied Science and Manufacturing, 2003, no. 34, pp. 227–236.

Shinoda, T., Odani, H., Wadahara, E., Komori, Y., Shono, T. A-VaRTM Technology Application for Japan’s New Regional Jet Aircraft. Proceedings of the 16th International Conference on Composite Materials, 2007, pp. 20 –29.

Alfred, C. Loos, Sayre, J. RFI and SCRIMP Model Development and Verification. Final Report Grant № NAG- 1-1881 Supplement 3. Department of Engineering Science and Mechanics Virginia Polytechnic Institute and State University, Blacksburg, VA 24061, 2000. 176 p.

Berenberg, B. Liquid composite molding achieves aerospace quality. High-Performance Composites, 2003, no. 6, pp. 18 – 22.

Abe, T., Hayashi, K. A-VaRTM for primary air-craft structures. Proceedings of the 25th international SAMPE conference, Paris Seiko, 2007, pp. 1 – 20.

Bolick, R., Ajit, D. Kelkar. Innovative composite processing by using H-VARTM method. Proceedings of the 25th international SAMPE conference, Paris Seiko, 2007, pp. 200 – 223.

Niggemann, C., Young Seok Song, John W. Gil-lespie, Heider, D. Experimental Investigation of the Controlled Atmospheric Pressure Resin Infusion Process. Journal of Composites materials, vol. 42, no. 11, 2008, pp. 1049 – 1061.

Baker, A., Dutton, S., Kelly, D. Composite Mate-rials for Aircraft Structures. Virginia, American Institute of Aeronautics and Astronautics Inc., Reston, 2004. 599 p.

Celle, P., P. de Luca, Drapier, S., Bergheau, J. M. Numerical modeling of Liquid Resin Infusion Processes. Proceedings of the International Conference SAMPE, Baltimore, USA, 2007, pp.1 – 11.

Krivov, G. A., Tarasov, Yu. M. A., Gromashev, G., Zabashta, V. F. Tekhnologiya bezavtoklavnogo formovaniya silovykh konstruktsii planera samoleta iz kompozitsionnykh materialov [Technology of non-autoclaved forming of power structures of airframe of airplane from composite materials]. Tekhnologicheskie sistemy, 2009, no. 5, pp. 47 – 70.

Cauchois, J. P., Raynal, I. Closed-mould technologies in composite processing. JEC Composites Magazine, 2007, no. 3, pp. 37 – 39.

Gaidachuk, A. V., Rusin, M. Yu. Kontseptual'nyi podkhod k analizu sovershenstva tekhnologii proizvodstva izdelii iz materialov s upravlyaemymi svoistvami [A conceptual approach to the analysis of the perfection of production technology of products from materials with controlled properties]. Nauchnye trudy Gosudarstvennogo aero-kosmicheskogo universiteta im. N. E. Zhukovskogo «KhAI» «Otkrytye informatsionnye i komp'yuternye integrirovannye tekhnologii» [Proc. of the State Aerospace University Kharkov Aviation Institute "Open information and computer integrated technologies"], 1999, vol. 5, pp. 38 – 44.

Korol', V. N. Faktory, opredelyayushchie po-kazateli sovershenstva proizvodstvennogo protsessa sozdaniya samoleta i metody podderzhki prinyatiya upravlencheskikh reshenii [Factors determining the indices of the perfection of the production process of aircraft creation and methods of supporting the adoption of managerial decisions]. Nauchnye trudy Natsional'nogo aerokosmicheskogo universiteta im. N. E. Zhukovskogo «KhAI» «Otkrytye informatsionnye i komp'yuternye integrirovannye tekhnologii» [Proc. of the National Aerospace University Kharkov Aviation Institute "Open information and computer integrated technologies"], 2003, vol. 19, pp. 1 – 12.

Bondar', V. G., Korol', V. N. Realizatsiya printsipov izgotovleniya konstruktsii iz polimernykh kompozitsionnykh materialov na ANTK «Antonov» [Implementation of the principles of construction of manufacturing of polymer composite materials ASTC "Antonov"]. Nauchnye trudy Natsional'nogo aerokosmicheskogo universiteta im. N. E. Zhukovskogo «KhAI» «Voprosy proektirovaniya i proizvodstva konstruktsii letatel'nykh apparatov» [Proc. of the National Aerospace University Kharkov Aviation Institute "Issues of design and manufacture of flying vehicles"], 2003, vol. 3, pp. 7 – 23.

Kotsiuba, A. A, Kondrat'ev, A. V. Sushchnost' i soderzhanie ponyatii effektivnosti v analize perspektivnykh ob"emov vnedreniya polimernykh kompozitsionnykh materialov v konstruktsiyakh otechestvennykh grazhdanskikh samoletov [Essence and content of efficiency concepts in the analysis of promising amount of polymeric composite materials application in domestic civil aircraft structures]. Tekhnologicheskie sistemy, 2016, no. 4(77), pp. 20 – 28.




DOI: https://doi.org/10.32620/aktt.2017.3.04