GAS-DYNAMIC EFFECT BY ANNULAR BLOWING ON FLOW IN AXIAL COMPRESSOR STAGE

Ю. М. Терещенко, Е. В. Дорошенко, И. А. Ластивка, И. П. Кудзиновская

Abstract


The paper presents the results of an evaluation of the efficiency of the gas-dynamic effect by annular blowing on the flow in the axial compressor stage. The results of numerical investigation of the flow in the axial compressor stage are obtained using of the turbulent model SST. A comparison of the results of numerical and physical experiments showed that the error in calculating of the flow parameters during simulation was 0.09 – 0.83%. The gasdynamic effect by annular blowing on the flow in the axial compressor stage the level of hydraulic losses in the rotor ξ from 0.085 to 0.048 with the value of the coefficient of impulse blowing  с = 0.05 ... 0.08.

Keywords


flow modeling, axial compressor stage, gas-dynamic effect, annular blowing.

References


Tereshhenko, Ju. M. Ajerodinamicheskoe sovershenstvovanie lopatochnyh apparatov kompressorov [Aerodynamic improvement of compressor blade rows]. Moscow, Engineering Publ., 1987. 168 р.

Staats, M., Nitsche, W., Steinberg, S. J., King R. Closed-loop active flow control of a non-steady flow field in a highly-loaded compressor cascade. CEAS Aeronaut. J., 2017, no. 8 (1), pp. 197–208. doi: 10.1007/s13272-016-0232-1.

Wang, S., Cai, L., Zhou, X., Lu, Sh. Numerical investigation on effectiveness of flow separation control in two-dimensional high-load compressor cascade by synthetic jet. Journal of Thermal Science, 2012, no. 21 (5), pp. 441–446. doi: 10.1007/s11630-012-0566- x.

Gardner, A. D., Richter, K., Mai, H., Neuhaus D. Experimental investigation of high-pressure pulsed blowing for dynamic stall control. CEAS Aeronautical Journal, 2014, no. 5 (2), pp. 185–198. doi: 10.1007/s13272-014-0099-y.

Svechnikov, V. S., Kirillov, A. B. Ajerodinamicheskie harakteristiki stupeni osevogo kompressora [Aerodynamic characteristics of axial compressor stage]. Moscow, CAGI Publ., 1958. 94p.




DOI: https://doi.org/10.32620/aktt.2017.7.04