REVIEW OF MANUFACTURING AND REPAIR OF AIRCRAFT AND ENGINE PARTS BASED ON COLD SPRAYING TECHNOLOGY AND ADDITIVE MANUFACTURING TECHNOLOGY
Abstract
Keywords
Full Text:
PDFReferences
Assadi, H., Kreye, H., Gärtner, F., Klassen, T. Cold Spraying – A Materials Perspective. Acta Materialia, 2016, vol. 116, pp. 382-407. DOI: 10.1016/j.actamat.2016.06.034.
Assadi, H., Gärtner, F., Stoltenhoff, T., Kreye, H. Bonding Mechanism in Cold Gas Spraying. Acta Materialia, 2003, vol. 51, no. 15, pp. 4379-4394. DOI: 10.1016/s1359-6454(03)00274-x.
Li, Z., Zhao-Yin, W., Hua-Dong, Z. Research Progress of Precipitation Mechanism and Apparatus of Cold Spray. Surface Technology, 2015.
Alkhimov, A. P., Kosarev, V. F., Papyrin, A. N. A Method of "Cold" Gas-dynamic Deposition. Soviet Physics Doklady, 1990, vol. 35, pp. 1047.
Grigoriev, S., Okunkova, A., Sova, A., Bertrand, P., Smurov, I. Cold Spraying: From Process Fundamentals Towards Advanced Applications. Surface & Coatings Technology, 2015, vol. 268, pp. 77-84. DOI: 10.1016/j.surfcoat.2014.09.060.
Richer, P., Yandouzi, M., Beauvais, L., Jodoin, B. Oxidation behaviour of CoNiCrAlY Bond Coats Produced by Plasma, HVOF and Cold Gas Dynamic Spraying. Surface & Coatings Technology, 2010, vol. 204, no. 24, pp. 3962-3974. DOI: 10.1016/j.surfcoat.2010.03.043.
Hassani-Gangaraj, M., Veysset, D., Nelson, K. A., Schuh, C. A. In-situ observations of single micro-particle impact bonding. Scripta Materialia, 2018, vol. 145, pp. 9-13. DOI: 10.1016/j.scriptamat.2017.09.042.
Alkhimov, A. P., Kosarev, V. F., Papyrin, A. N. Gas-dynamic spraying. An experimental study of the spraying process. Journal of Applied Mechanics and Technical Physics, 1998, vol. 39, no. 2, pp. 318-323. DOI: 10.1007/bf02468100.
Jianfeng, Z., Zhijun, C., Jianhua, Y. Effect of standoff distance on properties of Al coating during cold spraying. Heat treatment of metals, 2014, vol. 39, no. 06, pp. 88-90. DOI: 10.13251/j.issn.0254-6051.2014.06.023.
Grujicic, M., Zhao, C., DeRosset, W., Helfritch, D. Adiabatic shear Instability based mechanism for particles/substrate bonding in the cold-gas dynamic-spray process. Materials & Design, 2004, vol. 25, no. 8, pp. 681–688. DOI: 10.1016/j.matdes.2004.03.008.
Du, Baorui., Yao, Jun., Zheng, Huilong., Yu, Hao., Lin, Hongjie., Ding, Ruochen. Optimization Design and Manufacturing Technology for Aero-Engine Nozzle Based on Selective Laser Melting Fabrication. Aeronautical Manufacturing Technology, 2019, vol. 62, no. 11, pp. 14-18. DOI: 10.16080/j.issn1671–833x.2019.11.014.
Zhang, Xiaowei. Application of metal additive manufacturing in aero-engine. Journal of Aerospace Power, 2016, vol. 31, no. 1, pp. 18-24. DOI: 10.13224/j.cnki.jasp.2016.01.002.
Liu, Yi., So, Xinkun., Huang, Jing., Xinjia, Guangxiong., Li, Hua. Applications and Perspectives of Cold Spray Technique. Surface Technology, 2016, vol. 45, no. 9, pp. 25-31. DOI: 10.16490/j.cnki.issn.1001-3660.2016.09.004.
Wang, Zemin., Huang, Wenpu., Zeng, Xiaoyan. Status and Prospect of Selective Laser Melting Machines. Journal of Netshape Forming Engineering, 2019, vol. 11, no. 4, pp. 21-28. DOI: 10.3969/j.issn.1674-6457.2019.04.004.
Chen, Shuai., Tao, Fenghe., Jia, Changzhi., Yang, Jianchun. Status and Progress of Selective Laser Melting Forming Technology. Proceedings of the 2015 3rd International Conference on Machinery, Materials and Information Technology Applications, 2015, no. 11. DOI: 10.2991/icmmita-15.2015.239.
Zou, Tianchun., Ou, Yao. Effect of heat treatment on microhardness of laser selective melting of AlSi7Mg alloy. Hot Working Technology, 2019, vol. 48, no. 24, pp. 123-126.
Bagherifard, S, Monti, S., Zuccoli, M. V., Riccio, M., Kondás, J., Guagliano, M. Cold spray deposition for additive manufacturing of freeform structural components compared to selective laser melting. Materials Science and Engineering: A, 2018, vol. 721, pp. 339-350. DOI: 10.1016/j. msea.2018.02.094.
Song, Kaiqiang., Cong, Dalong., He, Qingbing., Zhang, Longping., Wu, Hulin., Li, Zhongsheng. Application and prospect of advanced cold spraying technology. Equipment Environmental Engineering, 2019, vol. 16, no. 08, pp. 65-69.
Liu, Yi., Suo, Xin-kun., Huang, Jing. Applications and Perspectives of Cold Spray Technique in Biomedical Engineering: A Review. Surface Technology, 2016, vol. 45, no. 9, pp. 25-31.
Jahedi, M. Z., Zahiri, S. H., Gulizia, S., Tiganis, B., Tang, C., Fraser, D. Direct Manufacturing of Titanium Parts by Cold Spray. Light Metals Technology, 2009, vol. 618-619, pp. 505-508. DOI: 10.4028/msf.618-619.505.
Sova, A., Grigoriev, S., Okunkova, A., Smurov, I. Potential of cold gas dynamic spray as additive manufacturing technology. The International Journal of Advanced Manufacturing Technology, 2013, vol. 69, no. 9-12, pp. 2269-2278. DOI: 10.1007/s00170-013-5166-8.
Beese, A. M., Carroll, B. E. Review of mechanical properties of Ti-6Al-4V made by laser-based additive manufacturing using powder feedstock. JOM, 2016, vol. 68, no. 3, pp. 724-734. DOI: 10.1007/s11837-015-1759-z.
Deng, Huai-bo., Chen, Yu-hua., Chen, Wei., Wang, Shan-lin. Research Progress in Additive Manufacturing Technology of Copper Alloy. Journal of Netshape Forming Engineering, 2018, vol. 10, no. 5, pp. 95-101. DOI: 10.3969/j.issn.1674-6457.2018.05.016.
Zhu, Zhaoyu., Chen, Changjun., Zhang, Min. Research Status and Prospect of Laser Additive Manufacturing of Magnesium Alloys. Laser & Optoelectronics Progress, 2019, vol. 56, no. 19, pp. 74-82.
Villafuerte, Julio., Wright, David. Practical Cold Spray Success: Repair of Al and Mg Alloy Aircraft Components. Advanced Materials and Processes, 2010, vol. 168, no. 5, pp. 53-55.
Yin, S., Cavaliere, P., Aldwell, B., Jenkins, R., Liao, H., Li, W., Lupoi, R. Cold spray additive manufacturing and repair: Fundamentals and applications. Additive Manufacturing, 2018, vol. 21, pp. 628-650. DOI: 10.1016/j.addma.2018.04.017.
Victor, K. C., Leyman, P. F. Magnesium Repair by Cold Spray. Army Research Laboratory, 2008.
Julil, V., David, W. Practical Cold Spray Success: Repair of Al and Mg Alloy Aircraft Components. Adv Mater Proc, 2010, vol. 168, no. 5, pp. 53.
Stoltenhoff, T. Coatings for Aluminum Aerospace Components Exposed to High Dynamic Stresses. Ratingen Germany, 2012.
C, Yu., Wu, Z., Liu, R., Dionysiou, D. D., Yang, K., Wang, C., Liu, H. Novel fluorinated Bi 2 MoO6 nanocrystals for efficient photocatalytic removal of water organic pollutants under different light source illumination. Applied Catalysis B: Environmental, 2010, vol. 209, pp. 1-11. DOI: 10.1016/j.apcatb.2017.02.057.
Li, W., Yang, K., Yin, S., Yang, X., Xu, Y., Lupoi, R. Solid-state additive manufacturing and repairing by cold spraying: A review. Journal of Materials Science & Technology, 2018, vol. 34, no. 3, pp. 440-457. DOI: 10.1016/j.jmst.2017.09.015.
Eason, P. D., Fewkes, J. A., Kennett, S. C., Eden, T. J., Tello, K., Kaufman, M. J., Tiryakioğlu, M. On the characterization of bulk copper produced by cold gas dynamic spray processing in as fabricated and annealed conditions. Materials Science and Engineering: A, 2011, vol. 528, no. 28, pp. 8174-8178. DOI: 10.1016/j.msea.2011.07.012.
Huang, R., Ma, W., Fukanuma, H. Development of ultra-strong adhesive strength coatings using cold spray. Surface and Coatings Technology, 2014, vol. 258, pp. 832-841. DOI: 10.1016/j.surfcoat.2014.07.074.
Li, Wenya., Zhang, Dongdong., Huang, Chunjie., Guo, Xueping. Application and Research Status of Cold Spraying Technology in the Field of Additive Manufacturing and Remanufacturing. Welding, 2016, no. 4, pp. 2-8 + 73.
Zhang, Mengqing., Qiao, Yulin., Zhang, Zhong. Simulation of heat transfer acceleration behavior of cold sprayed Cu-based composites. China Equipment Engineering, 2019, no. 23, pp. 135-136.
Li, W.-Y., Zhang, C., Wang, H.-T., Guo, X. P., Liao, H. L., Li, C.-J., Coddet, C. Significant influences of metal reactivity and oxide films at particle surfaces on coating microstructure in cold spraying. Applied Surface Science, 2007, vol. 253, no. 7, pp. 3557-3562. DOI: 10.1016/j.apsusc.2006.07.063.
Dosta, S., Couto, M., Guilemany, J. M. Cold spray deposition of a WC-25Co cermet onto Al7075-T6 and carbon steel substrates. Acta Materialia, 2013, vol. 61, no. 2, pp. 643-652. DOI: 10.1016/j.actamat.2012.10.011.
Pattison, J., Celotto, S., Morgan, R., Bray, M., O’Neill., W. Cold gas dynamic manufacturing: A non-thermal approach to freeform fabrication. International Journal of Machine Tools and Manufacture, 2007, vol. 47, no. 3-4, pp. 627-634. DOI: 10.1016/j.ijmachtools.2006.05.001.
Kang, K., Bae, G., Won, J., Lee, C. Mechanical property enhancement of kinetic sprayed Al coatings reinforced by multi-walled carbon nanotubes. Acta Materialia, 2012, vol. 60, no. 13-14, pp. 5031-5039. DOI: 10.1016/j.actamat.2012.05.034.
Rokni, M. R., Widener, C. A., Crawford, G. A., West, M. K. An investigation into microstructure and mechanical properties of cold sprayed 7075 Al deposition. Materials Science and Engineering: A, 2015. vol. 625, pp. 19-27. DOI: 10.1016/j.msea.2014.11.059.
Leyman, P. F. Cold Spray Process Development for the Reclamation of the Apache Helicopter Mast Support, ARL-TR, 2009, vol. 8, pp. 4922.
Widener, C. A., Carter, M. J., Ozdemir, O. C., Hrabe, R. H., Hoiland, B., Stamey, T. E., Champagne, V. K., Eden, T. J. Application of High-Pressure Cold Spray for an Internal Bore Repair of a Navy Valve Actuator. Journal of Thermal Spray Technology, 2015, vol. 25, no. 1-2, pp. 193–201. DOI: 10.1007/s11666-015-0366-4.
Lyalyakin, V. P., Kostukov, A. Y., Denisov, V. A. Special features of reconditioning the housing of a Caterpillar diesel oil pump by gas-dynamic spraying. Welding International, 2015, vol. 30, no. 1, pp. 68-70. DOI: 10.1080/09507116.2015.1030152.
Jones, R., Molent, L., Barter, S., Matthews, N., Tamboli, D. Supersonic particle deposition as a means for enhancing the structural integrity of aircraft structures. Int. J. Fatigue, 2014, vol. 68, pp. 260-268. DOI: 10.1016/j.ijfatigue.2014.03.013.
Matthews, N., Jones, R., Sih, G. C. Application of supersonic particle deposition to enhance the structural integrity of aircraft structures. Sci. China Phys. Mech. Astron, 2014, vol. 1, no. 57, pp. 12-18. DOI: 10.1007/s11433-013-5367-z.
Zhang, H., Zhao, C. Y., Cui, B. The corrosion behavior of cold spray coating on 2219 Al alloy joints prepared by friction stir welding. Phys Conf Ser, 2018, vol. 1063, pp. 1-6.
Yandouzi, M., Gaydos, S., Guo, D., Ghelichi, R., Jodoin, B. Aircraft Skin Restoration and Evaluation. Journal of Thermal Spray Technology, 2014, vol. 8, no. 23, pp. 1281-1290. DOI: 10.1007/s11666-014-0130-1.
Jia, Li., Cui, Lang., Liu, Guang., Zheng, Ziyun. Wear property of cold sprayed Al coating. Ordnance Material Scienceand Engineering, 2017, vol. 40, no. 3, pp. 78-80.
Schell, J. Cold spray aerospace applications. CSAT Workshop, Worcester, USA, 2016.
Wei, Y.-K., Li, Y.-J., Zhang, Y., Luo, X.-T., Li, C.-J. Corrosion resistant nickel coating with strong adhesion on AZ31B magnesium alloy prepared by an in-situ shot-peening-assisted cold spray. Corrosion Science, 2018, vol. 138, pp. 105-115. DOI: 10.1016/j.corsci.2018.04.018.
Kazasidis, Marios., Yin, Shuo., Cassidy, Jonathan., Volkov-Husović, Tatjana., Vlahović, Milica., Martinović, Sanja., Kyriakopoulou, Elena., Lupoi, Rocco. Microstructure and cavitation erosion performance of nickel-Inconel 718 composite coatings produced with cold spray. Surface & Coatings Technology, 2019, vol. 382. DOI: 10.1016/j.surfcoat.2019.125195.
Li, Wenya., Cao, Congcong., Yin, Shuo. Solid-state cold spraying of Ti and its alloys: a literature review. Progress in Materials Science, 2019, no. 6, pp. 100633.
Shichun, Pang., Fuzhong, Cong., Shouyu, Tong., Zuo, Ping. Research of Calendar Life of Protection Layer of Aircraft Structure. Energy Procedia, 2011, vol. 13. pp. 16-18. DOI: 10.1016/j.egypro.2011.12.293.
Astarita, A., Genna, S., Leone, C., Memola Capece Minutolo, F., Squillace, A., Velotti, C. Study of the laser marking process of cold sprayed titanium coatings on aluminium substrates. Optimal Laser Technol. 2016, vol. 83, pp. 168-176. DOI: 10.1016/j.optlastec.2016.04.007.
Nie, H. J., Li, H., Long, W. M. Brazing process and joint properties of eutectic contact reaction between magnesium alloy and steel using cold sprayed copper coating as the intermediate layer. Weld, 2017, vol. 37, no. 7, pp. 83-87.
Zhou, X., Mohanty, P. Corrosion behaviour of cold sprayed titanium coatings in simulated body fluid. Corrosion English Sci Technology, 2012, vol. 47, no. 2, pp. 145-154. DOI: 10.1179/1743278211y.0000000037.
Li, W., Cao, C., Wang, G., Wang, F., Xu, Y., Yang, X. “Cold spray +” as a new hybrid additive manufacturing technology: a literature review. Science and Technology of Welding and Joining, 2019, pp. 1-26. DOI: 10.1080/13621718.2019.1603851.
Zhao, C. Y., Zhang, H., Shao, T. G. Microstructure and corrosion behavior of Al coating deposited by cold spraying onto FSW AA2219-T87 joint. Corrosion Eng Sci Tech, 2018, vol. 54, no. 1, pp. 1-7.
Marrocco, T., Hussain, T., Mccartney, D. G., Shipway, P. H. Corrosion performance of laser post treated cold sprayed titanium coatings. Thermal Spray Technology, 2011, vol. 20, no. 4, pp. 909-917. DOI: 10.1007/s11666-011-9637-x.
Champagne, V. K. The Repair of Magnesium Rotorcraft Components by Cold Spray. Journal of Failure Analysis and Prevention, 2008, vol. 2, no. 8, pp. 164-175. DOI: 10.1007/s11668-008-9116-y.
AL-Mangour, B., Dallala, R., Zhim, F., Mongrain, R., Yue, S. Fatigue behavior of annealed cold-sprayed 316L stainless steel coating for biomedical applications. Materials Letters, 2013, vol. 15, no. 91, pp. 352-355. DOI: 10.1016/j.matlet.2012.10.030.
Li, Z., Yang, X., Zhang, J. Interfacial mechanical behavior and electrochemical corrosion characteristics of cold-sprayed and hot-rolled titanium/stainless/steel couples. Adv Eng Mater, 2016, vol. 7, no. 18, pp. 1240-1249. DOI: 10.1002/adem.201500567.
DOI: https://doi.org/10.32620/aktt.2020.3.06